Retina E2200 PCI

Retina E2200 is a PCI adapter card for Linux with two E1 interfaces.

Ethernet Services over Copper at New Speeds

VDSL2 Products Available

New SW Release available for the Iris440 shdsl

Retina C5400 PCI

Retina C5400 is a PCI adapter card for Linux with two shdsl and two E1 interfaces. The shdsl interfaces offer full duplex data transfer over one copper pair (2 wires) speed selectable between 128 kbps to 4.608 Mbps. The G.703/G.704 E1 interfaces max speed is 2.048 Mbps. The adapter card can be installed under Linux kernel with provided general purpose driver and utilities.


Main properties
  • PCI card for for high speed shdsl and E1 data transmission with Linux system
  • Two shdsl ports with max 4.608 Mbps speed, two E1 ports with max 2 Mbps
  • Linux kernel driver and CLI
  • Selectable Remote / Central operation mode
  • Adjustable DMA transfer unit size for optimizing performance
  • Flexible clocking alternatives
  • SW/FW upgrades downloadable from www.dcombus.com

Applications
  • Embedded Linux applications
  • server based applications, firewalls, gateways, routers
  • VoIP-PBX gateways & servers
  • Video conferencing applications
  • Symmetrical broadband connections
  • Fast point-to-point connections, fast copper access
  • LAN to LAN, WAN to LAN

Technical details

Card type

  • PCI vers 2.2 compliant
  • Short, full height card
  • Suitable for 32b and 64b PCI bus slots
  • Using 3.3V & 12V from the PCI bus or 3.3V only

Linux support & utilities

  • Driver supports standard Linux kernel versions 2.4.4, 2.4.18 and 2.4.20, customizable
  • RetiMan menu-based interface for configuration & management
  • Reti_line command line interface

Interfaces, shdsl (2x)

  • Speed selectable between 128 kbps to 4.608 Mbps in 64k increments
  • TC-PAM (Trellis Coded Pulse Amplitude Modulation) shdsl line code G.991.2
  • LED indications: (1) LOS, (2) line config in progress, (3) OK
  • RJ-11 connectors

Operation distances, shdsl interfaces

  • 9.5 km @ 512 kbps
  • 6.5 km @ 2.3 Mbps
  • 3.0 km @ 4.6 Mbps

Interfaces, E1 (2x)

  • Clocking alternatives SW selectable: (1) Line clocking, (2) Line clocking from the other E1 line in the same card, (3) Internal clocking, or (4) External clocking from the ExtClk interface
  • Packet or stream mode operation (sw selectable)
  • LED indications: (1) LOS, (2) AIS, (3) OK
  • RJ-45 connectors

Operation distances, E1 interfaces

  • 1.5 km @ 2.048 Mbps
  • Selectable Short haul/long haul
Design Combus Ltd   info@dcombus.com   Tel: +358 3 345 8800 Support: support@dcombus.com   Tel: +358 3 345 8811 Disclaimer