VDSL2: MVD10024 - 24-port DSLAM
VDSL2 24-port DSLAM, 2+2 uplink ports. Max data rate 100 Mbps/100 Mbps.
N5000 DSLAM supporting 15/15 Mbps per copper pair
The N5000 DSLAM's new version EFMC4 linecards now enables 15/15 Mbps over cop..
Read more
New FW version available for N4000 DSLAM
New FW version is available for the N4000 DSLAM. The FW package dc_n4000-1.1...
Read more
N4000: small, fixed port SHDSL DSLAM
DCombus has started shipping new 24-port SHDSL DSLAM. The N4000 is 45 mm high..
Read more
|
Iris 800 DSLAM
(Note: end of availability announced) Iris 800 DSLAM from DCombus integrates several shdsl line interfaces into the same platform. It is capable of handling maximum of 32 shdsl lines and offers 10/100/1000M Ethernet uplink. It reduces the needed device space and overall cost via port integration. Iris 800 has enhanced management features over network. The packet based traffic can be forwarded according to VLANs (IEEE802.1Q) and so called double tagging is also supported. Several shdsl ports can belong into one VLAN. In data communications equipments the quality of service (QoS) type of features can be used to quarantee certain service levels for end users. The QoS functions in Iris 800 can prioritize VLAN traffic according to defined priority queues. Several end user protocols and applications benefit this since those might be delay sensitive or need quaranteed bandwidth. Iris 800 DSLAM can be managed over a secure SSH link via network, trough console port or with web browser. The system supports also SNMP monitoring. The SW/FW upgrades can be done directly with the CLI (Command Line Interface) over network with http/ftp protocol. The remote shdsl CPE modems (Iris 10/20) can be fully managed and monitored, including SNMP, with the Iris 800 management. |
Main properties
- 32x 5.7 Mbps or with bundling 16x 11.4 Mbps g.shdsl ports
- 10/100/1000M Eth uplink liityntä
- IEEE 802.1Q VLAN
- QoS
- SNMP
- CLI, Web UI management
Applications
- G.shdsl access
- System integration
- LAN-to-WAN
- LAN-to-LAN
- Integrated services
|
Technical details
Uplink
- 10/100/1000M Ethernet
- Auto negotiate, Manual 10/100/1000, Full/half duplex
- RJ45 connector
G.shdsl line card
- 4 ports per card, max 8 card per chassis
- Hotswap
- Line rate max. 4.6 Mbps with all 4 ports (1-pair), selectable with 64k steps
- Line rate max. 9.2 Mbps with 2 ports bundled together (2-pair), selectable with 128k steps
- TC-PAM G.991.2
- Fully compatible with Iris 10/20 CPE devices
- RJ6/6 connector
Protocols
- IP, TCP, UDP, ICMP, OSPF, FTP, HTTP, SNMP, SSH
VLAN
- Port based VLAN
- IEEE 802.1Q tag, q-in-q
- VLAN group based MAC tables
QoS
- Traffic priorization based on VLAN or IP/TOS
Management
- Command line interface (CLI) over secure SSH link, Web UI
- Console port
- Configuration, monitoring
- SNMP monitor support
- Remote Iris 10/20 CPE device management
- Software/firmware upgrades via http/ftp
Dimensions
- 444 x 440 x 88 mm
- 2U height in std 19 inch rack
Power
- 230 VAC, 50Hz, max 150 W
- 48 VDC/230VAC redundant available
Available product versions and accessories
- T4102003, Iris 800 DSLAM chassis (CPU, slots for max.8 CLS4 linecards)
- T4102002, CLS4 linecard (4x5.7 Mbps or 2x11.4 Mbps)
- T4301006, Control cable (PC/Iris 800)
- T4301018, Iris 800 modular cable (4m)
- T4301021, Iris 800 modular cable (8x4m,bundle)
|
|
Iris 800 DSLAM Datasheet
Request For Quotation